This free tool helps you turn your Windows 7 laptop into a Wi-Fi hotspot and share your connection with others. Connectify is free to use but you have to register before downloading it.
ERROR : The WinRM client cannot process the request. If the authentication scheme is different from Kerberos, or if the client computer is not joined to a domain, then HTTPS transport must be used or the destination machine must be added to the TrustedHosts configuration setting. When the local computer is not in a domain, the following procedure is required for remoting. 1. Configure the computer for HTTPS transport or add the names of the remote computers to the TrustedHosts list on the local computer. For instructions, see "How to Add a Computer to the TrustedHosts List" below. 2. Verify that a password is set on the workgroup-based computer. If a password is not set or the password value is empty, you cannot run remote commands. ...
Let’s begin the guide without wasting time. Just make sure that you have a pen drive with 4GB + capacity if you are making a bootable USB flash drive. Requirements to create bootable Windows USB: # Windows 7 or Vista ISO # Pen drive with 4GB+ (2 GB is sufficient for XP) # 15 Minutes of free time Procedure: 1. Insert your USB flash/pen drive to your system and backup all the data from the USB as your USB drive will be formatted during the process. 2. Now download WinToFlash tool (free) from here . 3. Run the tool, and browse to your Windows 7, Vista, or XP DVD files (make sure that your USB drive letter is correct). 4. Click Create button to begin the bootable USB process. Wait for few minutes to see the bootable USB. 5. That’s all!
Find your PCs open ports quickly with Roadkill’s tiny Scan Port scanner. Ports filtered by a firewall will easily be identified too. Download Roadkill’s Scan Port v1.3
Comments